Flat roof coatings in Port St. Lucie & the Treasure Coast
A seamless, reflective coating that seals a flat roof and sends the Florida sun back — for homes, additions and commercial buildings.
Call (772) 314-7244 Free estimate
- Family owned
- Open 24/7
- Licensed CCC1337667
One seamless skin. Nothing left to leak through.
A flat roof coating is a liquid-applied membrane rolled or sprayed over an existing flat or low-slope roof. It cures into one continuous, flexible layer with no seams. It seals small cracks and reflects sunlight.
When the roof underneath is still sound, a roof coating can be a smart alternative to tearing off and replacing a flat roof in Florida. Remco inspects it first and tells you honestly whether yours is a good candidate.
Bright white, seen from above
- 01
Roof inspection
We check the surface, drains, seams and soft spots to make sure the roof can take a coating.
- 02
Cleaning
Dirt, debris and loose material come off so the coating bonds to the roof.
- 03
Repairs first
Wet or damaged areas, open seams, blisters and flashing are fixed before any coating goes on.
- 04
Seams and details
Seams, drains, pipes and edges are reinforced, with primer where the surface needs it.
- 05
The coating
Silicone or acrylic elastomeric top coat, applied evenly at the right thickness: bright white and reflective.
- 06
Final walk
We check coverage and walk the roof with you.
Roofs we coat
- Flat and low-slope homes
- Additions and Florida rooms
- Porches and carports
- Commercial buildings
- Modified bitumen roofs
- Built-up roofs
Signs your flat roof needs attention.
Flat roofs fail quietly. These are the signs a coating — or a repair first — is due.
Leaks or stains under a flat or low-slope section.
Small cracks, blisters or alligatoring on the roof surface.
Open or lifting seams and edges where water can get under.
Water ponding for days after it rains.
A hot roof and a hot room underneath it.
A faded, chalky old coating that's worn thin.
Coatings work best on roofs that are still sound underneath. If yours isn't, we'll say so and quote the repair or replacement instead.
Bright white and sealed
How a roof coating works with Remco.
Prep is most of the job. We don't skip it.
- 01
Call or text
Any hour. Tell us about the roof, or text a photo.
- 02
Free roof inspection
Surface, drains, seams and soft spots checked first.
- 03
Written estimate
Repairs, coating system and price, on paper.
- 04
Prep and coat
Clean, repair, reinforce the details, then coat.
- 05
Walk-through
Coverage checked and the roof walked with you.
What affects the price of a roof coating.
We don't post prices, because every flat roof is different. These are the things that change the cost of a roof coating in Florida, and each one shows up in your written estimate.
- 01
Roof size
Measured in square feet: more roof means more coating and more labor.
- 02
Condition
Wet areas, blisters and open seams have to be repaired before coating.
- 03
Coating type
Silicone and acrylic elastomeric coatings differ in cost and in where they work best.
- 04
Thickness
Thicker applications and extra coats use more material.
- 05
Prep and details
Cleaning, primer, drains, pipes and edges.
- 06
Access
Roof height, how materials get up there and any site rules on commercial jobs.
Silicone or acrylic?
Silicone roof coating
- Handles ponding water well.
- Holds up to strong sun and weather.
- Usually costs more up front.
- Future coats generally need to be silicone too.
Acrylic elastomeric coating
- Water-based, bright white and reflective.
- Best on roofs that drain well.
- Not a good fit where water sits after rain.
- Often the more budget-friendly choice.
We recommend the coating that fits your roof, not the one that's easiest to sell. Get a free estimate
What is an elastomeric roof coating?
Elastomeric coatings are liquid-applied coatings that stretch and recover as a roof heats up and cools down. Acrylic and silicone are two common types. Applied over a sound flat roof, they form one seamless, reflective layer.
Is silicone or acrylic better for a flat roof in Florida?
It depends on the roof. Silicone handles ponding water well and holds up to strong sun. Acrylic is a good, often lower-cost choice on roofs that drain well. We recommend one after inspecting your roof.
Can you coat over my existing flat roof?
Often, yes, if the existing roof is still sound and dry underneath. Wet or damaged areas are repaired first. If the roof is too far gone, a coating won't fix it and we'll tell you so.
Will a white roof coating keep my building cooler?
A bright white, reflective coating sends back much of the sun's heat, which lowers the roof's surface temperature. How much difference you feel inside depends on your insulation and building, so we don't promise a number.
Do you coat commercial flat roofs?
Yes. Remco coats and repairs flat and low-slope roofs on homes, additions and commercial buildings across the Treasure Coast.
How much does a flat roof coating cost?
It depends on the roof size, its condition, the coating type and thickness, the prep work and access. We inspect the roof for free and give you a written estimate.
Flat roof coatings near you.
Based in Port St. Lucie, coating flat roofs on homes and businesses from Melbourne to Boynton Beach.
All 23 towns on the mapBrevard County 3
Indian River County 5
St. Lucie County 3
Okeechobee County 1
Martin County 4
Flat roof leaking or baking? Let's take a look.
Free roof inspection and a straight answer on whether a coating is right for it. Call or text, any hour.
(772) 314-7244